CPC1212

COPLANAR
RIBBON LINE ARRAY COLUMN

 

 

 


The SLS CPC1212 is a compact, high-output column line-source system. A true line-source array, the CPC1212 consists of twelve 6 woofers and ten twelve proprietary PRD500 high-output planar ribbon high-frequency drivers. The ribbon HF drivers are mounted in a coplanar configuration, positioned in front of the woofers to provide even, consistent horizontal coverage.

The line-source behavior of the CPC1212 provides excellent vertical pattern control, and a single CPC1212 provides good LF pattern control below 500Hz. The CPC1210 can also be stacked in multiples providing additional vertical coverage, higher system output, and better low-frequency vertical pattern control at lower frequencies.

The larger woofers and additional drivers allows the CPC1212 to provide more subjective power, higher output, and better LF pattern control than the smaller CPC1210.

The CPC1212 performs extremely well in difficult and problematic venues that exhibit high RT60 times, and/or where long projection with minimal visual impact is required.

The CPC1212 is unique in its ability to couple the aesthetic and pattern-control benefits of a low-profile column line array, with the exceptional clarity and fidelity inherent in a ribbon HF driver-based system. The waveform characteristics of a ribbon driver naturally matches the waveform requirements for line-source coupling, while avoiding the inherent performance trade-offs of a compression driver feeding a waveform-shaping manifold.

The ribbons developed and produced by SLS are specifically engineered for the power-handling and output required for demanding professional audio applications. Proven in years of service around the world, SLS ribbons provide exceptional power handling and output. Mounted in a column line array, SLS ribbon drivers provide unmatched project, sonic accuracy, clarity and transparency.
 

 

CPC1212 COPLANAR LINE ARRAY COLUMN
CPC1212 PROCESSOR SETTINGS
CPC1212/CPC1212-I GLL File
 

Key Features
  • (12) 6 extended LF woofers and (12) 5
    PRD500 Planar Ribbon Drivers

  • 90 Degree Horizontal Dispersion

  • Modular, can be used singly or in multiples.
     

Applications:

  • Developed for a wide range of professional
    applications where the highest quality is
    required
  • Sound reinforcement in churches and
    auditoriums
  • Modular, can be used singly or in multiples.

 

  • Ribbon High Frequency Driver
    Ribbons drivers are highly desirable in line arrays as they are a line source in and of themselves. The precise ribbon acoustic coupling allows for exceptionally consistent sound field coverage
    in the vertical plane.
     

  • CoPlanar Driver Arrangement -
    Ribbons by their nature are shallow drivers which allow us to easily mount them in front of woofers or midranges. Utilization of acoustic EQ and filtering in addition to a conventional crossover facilitates higher dynamic range and significant upper mid-band distortion reduction in comparison to conventional direct radiating designs. It also produces a compact, coherent and integrated sound source with symmetrical pattern control
     

  • LASS (Line Array Simulator Software)
    Calculates coverage angles and number of units needed for your particular application.

    Design Note: These line columns have no vertical dispersion in the HF within their typical throw distances. Vertical coverage is determined by the angle and rigging height of the column.

 



 

 



LASS Coverage Prediction Software (included)


 

 

HOME | PRODUCTS | TECHNOLOGY | INSTALLATIONS | ABOUT US | DISTRIBUTION | CONTACT US | DOWNLOADS

Copyright 2016 SLS Audio/Division of Dolby Laboratories - All Rights Reserved
1650 W. Jackson Ozark, MO 65721 417 323 7000