CPA6600v2/CPA6600v2-I
CO-PLANAR RIBBON LINE ARRAY



 

The CPA6600V2 is a compact, broad-bandwidth line array module designed for small to medium rooms that require exceptional performance and accuracy.

Utilizing SLS' proprietary high-output HF ribbon transducer technology, the cost-effective CPA6600V2 provides system integrators with a high-fidelity, broad-bandwidth, small-format array option.

This second-generation version is equipped with a new woofer and crossover, providing better low-frequency response and higher, cleaner system output (115dB at 1m, Continuous; 118dB, Program).

The CPA6600V2 utilizes SLS' Co-Planar symmetrical driver arrangement, enhancing horizontal coverage consistency.

The CPA6600V2 is a passive two-way system, utilizing a new, high-performance 6.5 transducer with SLS' PRD500 HF ribbon, and presents a nominal 16 Ohm load to the amplifier, lowering the total cost of the system.

The new woofer in the CPA6600V2 provides solid low-frequency response to 65Hz, and coupled with a subwoofer, provide exceptional broad-bandwidth system performance.

The CPA6600V2 is available in either a portable version with NL4 inputs (CPA6600V2), or an installation version with barrier-strip inputs (CPA6600V2-I). Both versions are available in black (-BK), white (-WH), or paintable (-NA) finishes.

The CPA6600V2 system provides exceptional sonic accuracy, frequency extension, dynamic range, and transparency. Specifically designed to provide a low installed system cost (minimal electronics, easy assembly and installation), the CPA6600V2 provides system designers with a compact, cost-effective, high-performance system for a variety of applications.

 

  • 16 ohm impedance

  • Passive crossover included

  • 65Hz to 20kHz Operating Range

  • 7.4H Front 5"H Back x 12.9W x 14.26D

  • Can power up to (6) units in parallel with one amp channel

  • Recommended Amplifier - 300W @ 16 Ohm

  • Recommended minimum (6) boxes be used in a single hang

  • Use our LASS (Line Array Simulator Software) to calculate coverage angles and number of units needed for your particular application

  • Standard version uses NL4 inputs, "I" version uses barrier strip inputs.

 
CPA6600RF
RIGGING FRAME FOR CPA6600v2 LINE ARRAY
CPA6600v2/CPA6600v2-I RIBBON LINE ARRAY SYSTEM 
CPA6600v2/CPA6600v2-I PRELIMINARY DATA SHEET
CPA6600v2/CPA6600v2-I GLL File

  • Ribbon High Frequency Driver
    Ribbons make the best line arrays because they are a line source in and of themselves. The precise ribbon acoustic coupling allows for exceptionally consistent sound field coverage in the vertical plane.
     
  • Co-Planar Driver Arrangement
    Ribbon Drivers by nature, are physically shallow which allow for convenient and compact mounting in front of woofers and midranges. Utilization of the resultant acoustic EQ and filtering, in addition to a conventional crossover, provides for a higher dynamic range and significant upper mid-band distortion reduction in comparison to conventional direct radiating designs. CoPlanar arrangement also helps produce a compact, coherent and integrated sound source while maintaining symmetrical pattern control.


 

  • Symmetrical Driver arrangement
    Consistent off axis performance. Easier to perform final EQ
     
  • Single pull back rigging
    Easier to assemble the array or set angles in the air or on the ground

     

   
 

HOME | PRODUCTS | TECHNOLOGY | INSTALLATIONS | ABOUT US | DISTRIBUTION | CONTACT US | DOWNLOADS


Copyright 2016 SLS Audio/Division of Dolby Laboratories - All Rights Reserved
1650 W. Jackson Ozark, MO 65721 417 323 7000